Volvo · Diesel
C30
2.4 TD - 180-BHP - 134-KW
100/100 data completenessCanonical technical profile
ECU PROFILEBOSCH EDC16C31(01/2006 - 01/2009)
INTERACTIVE DYNO PROJECTION
OEM to calibrated output.
These figures are database projections. The exact safe target is confirmed from the original file, software version, fuel, hardware and vehicle condition.
OEM180 hp
Stage 1225 hp
Stage 2248 hp
ECU ACCESS INTELLIGENCE
Programming context for this profile.
Tool support and access notes are imported from the supplied vehicle dataset. Always verify the current tool protocol and help file before connecting or opening a control unit.
- ECU / TCU
- BOSCH EDC16C31
- Engine code
- D5244T8
- Job type
- OBD - Bench Programming
- Power
- 134.2 kW
- Difficulty
- Easy
- OBD location
- Above pedals
- ECU location
- N/S/F wheel arch
- Opening note
- Opens both sides, board flip
KTAGBdm(MPC5xx) · 68
KESS V2OBD · 172
AutoTunerNot yet supported - Check tool
Magic X17OBD/Boot
CMDOBD/Boot
DATABASE-MATCHED CAPABILITIES
DPFEGRTVADTC diagnosticsSpeed limiterSwirl flap
Technical source note
On OBD access to ECU is required to program. Easiest to use Volvo cable
A canbus Uxxxx code can be displayed on the scantool after the remap relating to "Internal Control Module Software Incompatibility/Control Module, faulty software checksum ECM". Unfortunately there is no fix for this. This will not trigger a mil code nor trigger limp mode, its a background code to mark to Volvo the ECU has been remapped.
Have this exact vehicle?Send the original read so an engineer can verify software compatibility and the final target.
Start secure request